TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 15

Страница: 15 / 146

Page

A-7

GENERAL INFORMATION

Document 57.0003.4200 - 03/2005

Handler with telescopic boom

Agrilift 625 - Telelift 2506

Description:

label with transparent background “

General

application limits

”.

Meaning:

it defines the main limits to be strictly obeyed by the
operator when using the machine.

Location:

Present only in the

TCE version

within the cab, on the

windscreen, to the right of the driving place.

Description:

label with transparent background explaining the use
of the control lever.

Meaning:

by means of special symbols, this label explains all
pfunctions and motions of the control lever and the
pushbuttons.

Location:

Present only in the

TCE version

in the cab, on the

windscreen, to the right of the driving place.

WARNING

ONLY AUTHORIZED PERSONNEL CAN OPERATE
THIS EQUIPMENT. THE MANUFACTURER/DEALER
TAKE NO RESPONSABILITY FOR DAMAGE OR
INJURY CAUSED BY MISUSE OF THIS EQUIPMENT.

BEFORE OPERATING THE MACHINE ENSURE YOU
HAVE READ AND UNDERSTOOD THE SAFETY
GUIDELINES GIVEN IN THE MACHINE’S MANUAL.

THE INSTRUCTIONS ARE DELIVERED WITH THE
MACHINE; ADDITIONAL COPIES MAY BE
OBTAINED FROM YOUR DEALER OR DIRECTLY
FROM TEREXLIFT.

WARNING

DO NOT RAISE BOOM ON UNSTABLE OR SLOPING
GROUND.

NEVER EXCEED MAXIMUM PERMITTED LOADS
(SEE LOAD CHARTS).

EXERCISE CAUTION WHILE USING THE BOOM IN
A RAISED POSITION.

BEFORE LEAVING THE CAB ENSURE THE
FOLLOWING:

- TRANSMISSION IS NEUTRAL.
- PHAND BRAKE IS ON.
- BRING ANY LOAD TO THE GROUND.
- IGNITION SWITCH IS OFF AND KEY REMOVED.

WARNING

SAFETY GUIDELINES FOR MACHINES EQUIPPED
WITH STABILIZERS

NEVER USE THE STABILIZERS IF THE LOAD IS
ALREADY RAISED; THE STABILIZERS CAN BE USED
ONLY TO INCREASE THE STABILITY OF THE
MACHINE.

MPROPER USE OF THE STABILIZERS CAN CAUSE
INSTABILITY.

ENSURE THAT THE STABILIZER INDICATOR LAMP
IS ON BEFORE USING THE BOOM.

BEFORE RAISING ANY LOAD, LEVEL THE MACHINE
BY MEANS OF THE LEVEL INDICATOR.

Courtesy of Crane.Market

Содержание Agrilift 625



















































































































































Результаты поиска

Содержание Agrilift 625

Отзывы:

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 15 / 146

Результаты поиска

Содержание Agrilift 625

Отзывы: