manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 63 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 63

Page

  

C-27

OPERATING INSTRUCTIONS

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

■

 

 C-5.1 USING THE LOAD CHARTS

The charts indicating the maximum permissible load
in relation to the boom extension are installed on the
cab windscreen and/or illustrated in the quick guide.
The load chart indicates the payload limits of the
machine under safe conditions.
To operate under safe conditions, always refer to these
charts.

CAUTION

The load charts illustrated in this manual are given
only as a mere example. To define the payload
limits, refer to the load charts applied within the
cab of your machine.

CAUTION

The load charts applied on the cab windscreen refer
to a stationary machine standing on a solid and
level ground.
Raise the load some centimetres and check its
stability before raising it completely.

-1

4

3

2

3340

1

0

0

1

2

3

4

5

6

5750

2500 Kg

1500 Kg

1250 Kg

2000 Kg

800 Kg

1000 Kg

500

450

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов