manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 69 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 69

Page

  

C-33

OPERATING INSTRUCTIONS

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

•

Couple the connectors of the attachment, if any,
to the quick couplings of the frame.

DANGER

After the substitution of an attachment or after any
coupling operation, visually check the attachment.
A wrongly coupled attachment may result in damage
to persons or things.

■ 

C-5.5 REAR TOWING HITCH

(Agrilift 625)

The machine is equipped with a fixed towing hitch of
class 

B

.

This hitch can tow 2 or 4 axle trailers with a maximum
weight of 4000 kg.

Additionally it can be used for towing two-wheel carts
with a maximum weight of 1500 kg.

CAUTION

•

Do not tow too heavy trailers or loads.

•

The load on the drawbar must never be higher
than 500 kg.

•

Avoid abrupt starts due to the high risks of
rearing.

•

For your safety, do not tow trailers without an
independent braking system.

•

Before moving back with the machine to hook
the trailer, check that no one and nothing is
between the machine and the trailer. The
persons given the task of signalling must keep
a safe distance and in a well visible position for
the operator in the cab.

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов