manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 71 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 71

Page

  

C-35

OPERATING INSTRUCTIONS

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

■

 C-6.2 ROAD OR SITE TRANSFER

When travelling on public roads, strictly obey the local
or national road traffic regulations.

Besides, take into account the following general
precautions:

•

Align the rear wheels.

•

Select the two-wheel steer.

•

Set the ROAD-JOBSITE switch 

20

 to “ROAD” (the

light on the pushbutton comes on).

•

Lock the machine as indicated in the Registration
Card:

Lock the boom sections, the lifting cylinder, and the
attachment rotation cylinder (see photo).

•

Cover the teeth of the conventional forks with the
special guard; or withdraw the floating forks.

•

Retract boom and attachment to transfer position.

•

Make sure that lights, horn and turn signals are in
working order.

•

Start the machine (the beacon will switch on
automatically).

•

Select the forward or reverse speed.

•

The transfer speed of the vehicle will depend on the
engine rpm

.

CAUTION

Public road circulation is allowed only for
transferring an unloaded machine.

Do not use the Telelift 2506 for towing purposes.

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов