TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 28

Страница: 28 / 146

Page

A-20

GENERAL INFORMATION

Document 57.0003.4200 - 03/2005

Handler with telescopic boom

Agrilift 625 - Telelift 2506

A-6 LIFETIME

The lifetime of the machine is 10 000 hours provided
all checks, service jobs and overhauls are done at the
times scheduled.

DANGER

After this time, the machine must compulsorily be
inspected and tested by the Manufacturer before
being used again.

A-7 ITEMS SUPPLIED

Following items are supplied together with the
machine:

Description

625

2506

- Spanner CH 19

✘

(for fork positioning)

- Allen wrench CH 6

✘

(for fork positioning)

- 12 V lamps

✘

(spare)

■

A-7.1

LITERATURE SUPPLIED

The machines comes with the following literature:

Machine operator's handbook

DEUTZ engine use and maintenance manual

Courtesy of Crane.Market

Содержание Agrilift 625



















































































































































Результаты поиска

Содержание Agrilift 625

Отзывы:

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 28 / 146

Результаты поиска

Содержание Agrilift 625

Отзывы: