manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 51 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 51

Page

  

C-15

OPERATING INSTRUCTIONS

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

  C-3.4 CONTROL LEVER

Handlers are equipped with an hydraulically driven
servo-controlled lever.

The lever is equipped with two buttons for locking/
releasing the attachments 

  and for extending/

retracting the telescopic boom 

.

When shifted to one of the four directions (right/left,
forward/back), it controls the boom lifting/lowering and
the forward/back pitching of the attachment frame.
It is also equipped with an intentional control button

 that must be pressed and held in position until the

movement is completed.
If the button is not pressed down, the lever, though
operated, does not perform any function.

IMPORTANT

In the TCE version, the intentional control
pushbutton 

 

is not installed.

For the functions of the control lever in the TCE
version, please refer to 

par. C-3.4.1.1

.

IMPORTANT

Seize the control lever correctly and move it gently.
The motion speed of the actuators depends on the
lever position: a small motion results in a slow
motion of the actuators; vice versa, a full range
motion of the lever corresponds to the max. speed
of the actuator.

CAUTION

The control lever shall be operated only when
correctly seated in the driving place.

CAUTION

Before operating the control lever, make sure that
nobody is within the working range of the machine.

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов