TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 14

Страница: 14 / 146

Page

A-6

GENERAL INFORMATION

Document 57.0003.4200 - 03/2005

Handler with telescopic boom

Agrilift 625 - Telelift 2506

Description:

label on yellow background with
black drawing "

Hot surfaces. Risk

of burns

Meaning:

Applied on those surfaces which during operation can
become hot and cause burns.

Location:

In all parts involved such as exhaust silencer, thermal
engine, heat exchanger.

Description:

label on yellow background with
black drawing

Description:

Unscrew the plug with extreme

caution: hot oil. Risk of burns!

Meaning:

Warns the operator of the risk of burns when unscrewing
the plug of the compensation tank of the heat exchanger.

Location:

on the heat exchanger.

Description:

label with white background

“

Keep

out of the working range of the
machine

”.

Meaning:

when the machine is running, entering the working
range of the machine is prohibited.

Location:

one on the right side in the casing of the engine
compartment
one on the left side on the fuel tank

Description:

red/white label “

Keep out of the working range of

the machine

”.

Meaning:

when the machine is running, entering the working
range of the machine is prohibited.

Location:

on the telescopic boom, both on the right and on the
left.

KEEP OUT OF

WORKING RANGE

Courtesy of Crane.Market

Содержание Agrilift 625



















































































































































Результаты поиска

Содержание Agrilift 625

Отзывы:

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 14 / 146

Результаты поиска

Содержание Agrilift 625

Отзывы: