manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 3 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 3

Operator Handbook  

57.0003.4200 - AGRILIFT 625 -TELELIFT 2506

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system or
transmitted in any form or by any means without prior written permission from TEREXLIFT srl.
In pursuing a policy of constant quality improvement, TEREXLIFT srl reserves the right to make
changes at any time and without undertaking to give prior notice; therefore, also this publication
may be subject to modifications.
Some photos or drawings have been used to illustrate a specific  function; as a result, they may not
refer to the machine treated in this manual.

© Copyright 2007 

TEREXLIFT srl

 - All rights reserved

Produced by:

DEALER’S OR ASSISTANCE CENTRE STAMP

ZONA INDUSTRIALE  I-06019  UMBERTIDE (PG) - ITALIA

Tel. +39 075 941811 - Fax +39 075 9415382

Technical Assistance Service

Tel.: +39 075 9418129
        +39 075 9418171

e-mail: [email protected]

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов