manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 25 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 25

Page

  

A-17

GENERAL INFORMATION

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

■

  A-4.2

DESCRIPTION OF THE MAIN COMPONENTS

Hydrostatic transmission

This unit consists of parts which drive the machine
shifting, and namely:
-

a  variable displacement pump connected to the
thermal engine by an elastic joint

-

a motor with variable displacement and automatic
adjustment in relation to the wheel torque required,
complete with power divider, directly applied on
the rear axle

-

a hydraulic oil filter, placed on the discharge line to
the tank

-

a heat exchanger  to cool the circuit down.

Motion is transmitted to the rear axle from the power
divider through a Cardan shaft.

Engine

The thermal engine is equipped with a heat exchanger
which uses the engine oil as cooling medium.

Steering axles/(front and rear) differential gears

The differential axles transmit the motion to the wheels.
The locking device acting on the front axle enables
the machine to move also on low grip grounds.

Tyres

The machine is equipped with tyres suitably sized for
the maximum load allowed on the handler.
When worn, they shall be replaced with new ones
having the same dimensions and loading capacity.

Overload warning system

The overload warning system installed on the vehicle
enables the operator to work in safety conditions. A
display with 6 LED's hows the stability variation. When
the 6

th

  red LED comes on, the machine movements

are blocked, except for the boom retraction under safe
conditions.

Boom hydraulic circuit

It consists of a gear pump connected to the thermal
engine which, through a special valve, dispenses oil
to the hydraulic drive and a distributor for the following
functions:
-

boom lifting/lowering

-

telescopic boom extension/retraction

-

attachment rotation

-

attachment locking

Braking circuit

It consists of an independent circuit: the pedal directly
acts on the brake pump which dispenses oil to the
front axle braking unit with discs in oil bath.
The parking brake, of negative type, acts on the braking
unit of the service brake. This brake is engaged every
time the handler's engine is stopped or  pressing down
the light pushbutton located to the right of the driving
place.

Telescopic boom

The machine is equipped with a telescopic boom with
hydraulic-driven extension. The telescopes slides on
interchangeable pads made of wearproof material.

Driving cab

Type-approved driving cab in compliance with
standards ISO 3449 and EN 13510  (ROPS and FOPS).

Towing hitch (only Agrilift 625 version)

The machine is equipped with two towing hitches:
-

one at the front, to be used in an emergency, for
towing the disabled machine

-

one at the rear for towing trailers or carts.

■

  A-4.3

OPTIONAL ACCESSORIES

The machine can be fitted with a wide range of optional
accessories: please address to 

Terexlift 

sales network.

IMPORTANT

Please check the accessories available for your
machine.

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов