manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 53 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 53

Page

  

C-17

OPERATING INSTRUCTIONS

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

0 1 2 3 4 

F

R

N

■

 C-3.4.1.1  Function selection

The lever is enabled to carry out the following mo-
tions:

• 

Boom lifting/lowering

   Smoothly shift the lever to position 

 

to lift the 

boom or to position 

 

to lower it. 

• 

Boom extraction/retraction

 

Smoothly shift the lever to position 

 

to extend the 

boom or to position 

 

to retract it.

• 

Attachment forward/back tilting 

   Press button  

 

 and shift the lever to position 

 

to tilt the frame forward or to position 

 

to tilt it 

back.

• 

Attachment coupling/release

 Press 

button 

 together with the dashboard ena-

bling button (

17

) and shift the lever to position 

 

to unlock the attachment or to position 

 

to lock 

the attachment.

DANGER

Before operating the boom, make sure that no 
persons or animals are within the working range of 
the machine. Should that be the case, wait until the 
intruders leave the working range before operating 
the handler.

For TCE version

17

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов