manualshive.com logo in svg

TEREXLIFT Agrilift 625, Руководство оператора, Страница: 108 / 146

Поделиться
Скачать
TEREXLIFT Agrilift 625 Скачать руководство пользователя страница 108

Page

  

F-2

OPTIONAL ATTACHMENTS

Document 57.0003.4200 - 03/2005

Handler with telescopic boom 

 Agrilift 625 - Telelift 2506

 

INTRODUCTION

This section provides information on the optional
interchangeable attachments, especially manufactured
for the handlers.
Use only genuine attachments, described in this
section, after having read their features thoroughly and
understood their use.
To  install and remove the attachments, follow the
instructions supplied in the 

OPERATION section, par.

C-5.4.

DANGER

When replacing interchangeable attachments, keep
any person clear of the working area.

DANGER

Mounting optional attachments, and especially the
extension jib, can change the centre of gravity of
the machine. Before handling a load, check its
weight and compare it with the values on the load
charts. The weight of the used attachment must
always be deducted from the rated payload

.

■  

Procedure to connect hydraulic lines:

•

Couple the new attachment and lock it hydraulically.

•

Disconnect the quick couplings 

  of the

attachment locking cylinder and connect them to
the false connectors 

 

to prevent them from

getting dirty.

•

Connect the feeding hoses of the new attachment
to the quick couplings previously set free.

When the new attachment has two hydraulic motions
like, for instance, the pole and pipe planter, a flow
selecting valve 

 

shall be installed on the machine or

the attachment and operated from the cab by means of
switch 

22

.

Courtesy of Crane.Market 

Содержание Agrilift 625



















































































































































Отзывы:

Нет отзывов