Instructions
Rev C
Light Towers - AL™, RL™ Models
60
Lift Connect
™
Part No. 1295251GT
6 Route the loose end of the retrofit harness into
the cabinet through the access hole.
1 telematics module
7 Open the ground control side of the cabinet
and locate the 8 pin connector in the harness
from the ground control box.
8 Connect the loose end of the retrofit harness
to the 8 pin connector.
9 Secure the harness to the existing cables
using the provided cable ties.
Genie part number 21121GT.
10 Close the cabinet.
11 Locate the machine serial label.
12 Using a mild cleaning solvent, clean an area
next to the serial label. Adhere one of the
provided ESN decals to the machine.
Note: The ESN decals are provided with the
telematics module.
13 Adhere the lexan cover decal over the ESN
decal.
Genie part number 1291624GT.
Register and activate the telematics
module. Refer to page 7.
