Instructions
Rev C
Procedure - S
®
and Z® Booms
10
Lift Connect
™
Part No. 1295251GT
7 Secure the harness to the existing cables
using the provided cable ties.
Genie part number 21121GT.
8 Locate the machine serial label.
9 Using a mild cleaning solvent, clean an area
next to the serial label. Adhere one of the
provided ESN decals to the machine.
Note: The ESN decals are provided with the
telematics module.
10 Adhere the lexan cover decal over the ESN
decal.
Genie part number 1291624GT.
Register and activate the telematics
module. Refer to page 7.
S-65 XC, S-80 XC, S-85 XC
(includes TraX™ models)
This procedure only applies to the following serial
numbers listed below.
from serial number
S60XCH-45001 to S60XCH-45353
S65XCH-45001 to S65XCH-45353
S65XCM-101
S80XCH-104 to S80XCH-1556
S85XCH-101 to S85XCH-1537
Note: Perform this procedure on a firm, level
surface with the machine in the stowed position.
1 Using a mild cleaning solvent, clean the top of
the ground control box.
1 telematics bracket
2 ground control box
