TECAN AUSTRIA GMBH, Untersbergstrasse 1a, A-5082 Grödig / Salzburg, Austria
T +43 62 46 89 33, F +43 62 46 72 770, [email protected], www.tecan.com
Declaration of Conformity
We, TECAN Austria GmbH herewith declare under our sole responsibility that the product identified as:
Product Type:
Microplate Reader
Model Designation:
INFINITE M1000 PRO
Article Numbers :
30063849
Address: Tecan Austria GmbH
Untersbergstr.
1A
A-5082
Grödig,
Austria
is in conformity with the provisions of the following EC Directive(s) when installed in accordance with the
installation instructions contained in the product documentation:
2006/95/EC – Low Voltage Directive
2004/108/EC – EMC Directive
2006/42/EC – Machinery Directive
and that the standards referenced below were taken in consideration:
EN 61010-1:2001
Safety requirements for electrical equipment for measurement, control, and
laboratory use - Part 1: General requirements
EN 61010-2-081/A1:2003
Safety requirements for electrical equipment for measurement, control, and
laboratory use - Part 2-081: Particular requirements for automatic and
semiautomatic laboratory equipment for analysis and other purposes
EN 60825-1:2007
Safety of laser products - Part 1: Equipment classification and requirements
EN 61326-1:2006
Electrical Equipment for Measurement, Control, and Laboratory Use - EMC
Requirements - Part 1: General requirements
EN ISO 14121-1:2007
Safety of machinery - Risk assessment - Part 1: Principles
These
Instructions for Use
and the included
Declaration of Conformity
are valid for all INFINITE
M1000 PRO instruments with the article numbers listed above. The model designation varies
depending on the specific model with different article number.
Year of CE-marking:
2011
