Tadano GR-1600XL, Руководство по обслуживанию

Страница: 13 / 269

iii
Y-6 Assembly Adjustment
(Crane Operation) .................. 53
1. Boom head adjustment ........................... 53
1.1 Upper part of boom head ......................... 53
1.2 Lower part of boom head ......................... 53
1.3 Stopper for boom full retraction ................ 54
2. Boom clearance adjustment .................... 55
2.1 Shim adjustment at the telescoping
cylinder guide ..................................... 55
2.2 Shim adjustment at the lower part of
the boom bottom (inner box) .............. 56
2.3 Shim adjustment at the upper part of
the boom bottom (inner box) ............ 57
2.4 Shim adjustment at the side of
the boom bottom (inner box) .............. 58
2.5 Shim adjustment at the lower part of
the boom head (outer box) ................. 59
2.6 Shim adjustment at the upper part of
the boom head (outer box) ................. 60
2.7 Shim adjustment at the lower oblique
sides of the boom bottom
(inner box) .......................................... 61
2.8 Slide plate adjustment at the side of
the boom head (outer box) ................. 62
3. Counterweight cylinder synchronization
adjustment ................................... 63
3.1 Adjustment without counterweight
(rough adjustment) ............................. 63
3.2 Adjustment with counterweight
(regular adjustment) ........................... 64
Y-7 Assembly Adjustment
(Traveling Device) .................. 66
1. Service brake adjustment ........................ 66
1.1 Adjusting the brake pedal ......................... 66
1.2 Tightening the cap of reserve tank of
service brake fluid ............................... 66
1.3 Check after replacing brake hose ............. 66
2. Accelerator adjustment ............................ 67
2.1 Accelerator pedal ...................................... 67
3. Engine speed .......................................... 68
4. Retightening the hub nuts ....................... 68
5. Adding oil to the torque converter and
transmission ................................ 68
6. Axle alignment adjustment procedure ..... 69
6.1 Aligning the axles ...................................... 69
6.2 Adjusting the side slip and axle slip .......... 70
7. Tire and steering angle adjustment ......... 71
7.1 Tire size and air pressure ......................... 71
7.2 Adjusting the steering angle of axle .......... 71
8. Hydraulic suspension .............................. 72
8.1 Releasing pressure in the accumulators
for hydraulic suspension ..................... 72
9. Parking brake adjustment ........................ 73
9.1 Connecting the parking brake and brake
chamber .............................................. 73