Tadano GR-1600XL, Руководство по обслуживанию

Страница: 75 / 269

Y-6 Y-6
Assembly Adjustment (Crane Operation)
61
WY05-4112E
2.7 Shim adjustment at the lower oblique sides
of the boom bottom (inner box)
(Section [7])
(1) Adjust in the state that the inner box is extended
500 mm (1.64 ft) from the boom full retraction.
(2) Adjust the clearance between the outer box and
the inner box to be from 1.0 to 1.5 mm (0.04 to
0.06 in).
(3) Apply a thread locking agent (ThreeBond 1401 or
the equivalent) to the bolt.
(Table 6)
Standard number of shims
(per point)
Between
base and
TELE.1
1-mm shim: 3,
0.6-mm shim: 2
Between
TELE.1 and
TELE.2
1-mm shim: 3,
0.6-mm shim: 2
Between
TELE.2 and
TELE.3
1-mm shim: 3,
0.6-mm shim: 2
Between
TELE.3 and
TELE.4
1-mm shim: 3
Between
TELE.4 and
TELE.5
1-mm shim: 3,
0.6-mm shim: 2
(4) In the state that the slide plates above (2) contact
with the outer box, adjust the shims so that the
height difference between the guide surface
(X plane) of the outer box and the inner box shall
be 1 mm (0.04 in) or less.