Tadano GR-1600XL, Руководство по обслуживанию

Страница: 103 / 269

Y-10. Y-10.
Inspection and Maintenance
89
WY05-5050E
Y-10 Inspection and Maintenance
1. Refer to “Inspection and Maintenance” in “Operation Manual” of its applicable crane.
2. Maintenance of line filter
Maintenance table
Parts No. Parts name (used)
Type of
work
Points
/Quantity
Inspection and
maintenance interval
600 h 2400 h
6 months 2 years
09 Suspension circuit Clean 1 point

Inside of 12 Source of lower pilot pressure Clean 1 point

22-1
Slewing pilot circuit Clean 2 points

22-2
22-3
Steering upper circuit Clean 1 point

22-4 Changeover in upper pilot pressure destination Clean 1 point

22-5
Aux. winch/telescoping and slewing pilot valve
circuit
Clean 1 point

22-6 Main winch and elevating pilot valve circuit Clean 1 point

22-7
Elevation proportional solenoid valve circuit Clean 2 points

22-8
22-9
Telescoping proportional solenoid valve circuit Clean 2 points

22-11
22-10
Winch high-speed selection solenoid valve
circuit
Clean 1 point

22-12 Telescoping extension circuit Clean 1 point

22-13 Telescoping two-pressure selection circuit Clean 1 point

22-14 Steering mode selection solenoid valve circuit Clean 1 point

22-15 Slewing lock circuit Clean 1 point

22-16 Main winch high-speed selection circuit Clean 1 point

22-17 Aux. winch high-speed selection circuit Clean 1 point

22-18 Suspension lock circuit Clean 1 point

34 Telescoping, elevating pilot valve (pedal) circuit Clean 1 point

Inside of 47 Source of upper pilot pressure Clean 1 point

Inside of 57 Automatic stop circuit Clean 2 points

69 Winch brake circuit Clean 1 point

97 Steering and slewing pump circuit
Replace
element
1 point

(*1)
(Note): For the location of the parts, see "Z-1.1 Comparison table of hydraulic parts (part No., part name,
coordinate and location)", "Z-7 Hydraulic Parts Location Diagram (Upper)" and "Z-8 Hydraulic Parts
Location Diagram (Lower)" in the chapter Z.
(*1): Or when filter clogging warning lamp lights up.