Y-5
Y-5
Adjusting Procedure (Electric)
43
WY04-2421E
7. Over-front detection switch (CN521)
Fully retract the boom and slew it to the over-front.
Insert the slewing lock pin and set the boom angle to
0°. Then, adjust the switch position so that the
dimension A becomes 3
+
0
–0.5
mm (0.12
+
0
–0.02
in).
(*1):
•
Apply a thread locking agent (ThreeBond 1401
or the equivalent) to the threaded section of
the switch.
•
Switch fixing nut tightening torque
: 19 to 20 N-m (1.93 to 2.04 kgf-m)
(14.0 to 14.8 ft-lbf)
[NOTICE]
Make sure that the green
△
1
orange LED lights up
when the switch is activated.
8. Control lever stand position detection
switch (left) (CN529)
Set the clearance B to minimum, and adjust switch
position so that the dimension A becomes
1.5
+0.5
–
0
mm (0.06
+0.02
–
0
in).
(*1):
•
Apply a thread locking agent (ThreeBond 1401
or the equivalent) to the threaded section of
the switch.
•
Switch fixing nut tightening torque
: 19 to 20 N-m (1.93 to 2.04 kgf-m)
(14.0 to 14.8 ft-lbf)
△
1
349-521-30000
△
2
343-234-41000
△
3
343-233-81000
Applicable serial No.
：
FE5098 - -
△
1
Содержание GR-1600XL
