Tadano GR-1600XL, Руководство по обслуживанию

Страница: 100 / 269

Y-9 Y-9
Operation Check (Traveling Device)
86
WY05-5040E
Operation
Suspension lock indicator
Suspension state
Extend the slides by the outrigger
operation switch
(central/individual) and jack up the
crane.
Set the outrigger status on the
AML to extension status.
Flashes slowly Locked

Suspension falls rapidly if the suspension free switch is pressed while
the boom is in front and the crane is in the jack-up state.
Do not operate the switch.
↓
Slew the boom in an over-side
direction.
(Elevating angle shall be 50° or
less if boom raising operation is
also performed.)
Flashes slowly Locked
↓
PTO - OFF Flashes slowly Locked

Check that the suspension does not fall even if the suspension
up/down switch or suspension free switch is pressed while the boom
is in an over-side.
↓
Turn ON the PTO switch.
After slewing the boom to the
over-front, stow the jacks and
slides.
Flashes slowly Locked
↓
Keep pressing the suspension
free switch for 1 second or more.
Flashes fast Suspension emergency free
↓
Perform boom extending
operation.
Flashes fast Suspension emergency free

Check that the boom stops after it extends by 0.1 to 0.2 m (0.33 to
0.66 ft) from the fully retracted state.
↓
Perform boom raising operation.

Check that the boom stops at the elevating angle of 70°.
Flashes fast Suspension emergency free
↓
Set the crane in the traveling state
by the telescoping and elevating
operation, then turn OFF the PTO
(with the suspension as is).
Flashes slowly Locked
↓