Sun Microsystems Server X4-2, Руководство по установке

Страница: 77 / 208

Installing the Server Into a Rack 63
FIGURE:
CMA With Cables Installed, Cable Covers Closed, and Cables Secured With
Velcro straps
17. Ensure that the secured cables do no extend above the top or below the bottom
of the server to which they are attached; otherwise, the cables might snag on
other equipment installed in the rack when the server is extended from the rack
or returned to the rack.
Note – If necessary, bundle the cables with additional Velcro straps to ensure that
they stay clear of other equipment. If you need to install additional Velcro straps,
wrap the straps around the cables only, not around any of the CMA components;
otherwise, expansion and contraction of the CMA slide bars might be hindered when
the server is extended from the rack and returned to the rack.
18. Proceed to “Verify Operation of Slide-Rails and CMA” on page 73 and verify the
operation of the slide-rails and the CMA.
Related Information
■
“Verify Operation of Slide-Rails and CMA” on page 73
■
“Remove the Second-Generation Cable Management Arm” on page 64