Sun Microsystems Server X4-2, Руководство по установке

Страница: 201 / 208

Site Planning Checklists 187
TABLE:
Rackmount Checklist
Rackmount Considerations Yes No N/A Comment
Is the distance between the front and rear
mounting planes between the minimum or
610 mm and the maximum 915 mm (24
inches to 36 inches)?
Is the clearance depth in the front of the
front mounting plane (distance to the front
cabinet door) at least 25.4 mm (1 inch)?
Does the target rack meet the following
minimum load capacity:
• 19 kg/rack unit
• 785 kg total
Is the rack a four-post rack (mounting at
both front and rear)?
Two-post racks are not compatible.
Does the rack’s horizontal opening and unit
vertical pitch conform to ANSI/EIA
310-D-1992 or IEC 60927 standards?
Does the rack have RETMA rail support?
Does the rack support Oracle cable
management arms (CMAs)?
Does the rack support installation of Oracle
vented and solid filler panels?
Is there sufficient space for a cable harnesses
and the power distribution units (PDUs) in
the rack, if required?
Can a label with the server serial number be
printed and attached to the target rack?
Did you run the required network cables
from your network equipment to the
location where the server will be installed?
Did you label the network cables that will
connect to the server?
Does the rack support installation of
standard Oracle PDUs?
If not, then complete this checklist.
Can the customer provide equivalent PDUs?