Sun Microsystems Server X4-2, Руководство по установке

Страница: 53 / 208

39
Installing the Server Into a Rack
This section describes how to install the server into a rack using the rail assembly in
the rackmount kit. Perform these procedures if you purchased the rail assembly.
Description Links
Complete all installation
prerequisite tasks. “Installation Prerequisites” on page 40
Check that your rack meets the
requirements for installation of this
server. “Rack Requirements” on page 40
Review safety precautions. “Safety Precautions When Rackmounting the
Server” on page 41
Verify that you have received all
components of the rackmount kit. “Rackmount Kit Contents” on page 42
Stabilize the rack. “Stabilize the Rack for Installation” on page 43
Install mounting brackets onto the
server. “Install Mounting Brackets” on page 44
Mark the rackmount location. “Mark the Rackmount Location” on page 46
Attach the tool-less slide-rail
assembly to the rack. “Attach Tool-less Slide-Rail Assemblies” on page 47
Install the server into the slide-rail
assembly. “Install the Server Into the Slide-Rail Assemblies”
on page 50
(Optional) Install the cable
management arm for routing server
cables. • “Install the Second-Generation Cable
Management Arm” on page 52
• “Remove the Second-Generation Cable
Management Arm” on page 64
• “Install the First-Generation Cable Management
Arm” on page 68
Verify that the slide-rails and cable
management arm are working
correctly. “Verify Operation of Slide-Rails and CMA” on
page 73