Sun Microsystems Server X4-2, Руководство по установке

Страница: 68 / 208

54 Sun Server X4-2 Installation Guide • February 2014
Note – The CMA ships with three, flat cable covers installed. If you are going to
install the CMA on a Sun Server X4-2L, you need to remove the flat cable covers and
install the round cable covers.
3. If you are installing the CMA on a Sun Server X4-2L, remove the flat cable
covers and install the round cable covers; otherwise proceed to the next step.
To remove the flat cable covers and install the round cable covers, perform these
steps:
a. Lift up on the cable cover handle (the handle is colored green) and open it
180 degrees to the horizontal position as shown in the following figure
[frames 1 and 2].
Note – The CMA has three cable covers, two with two hinges (one of which is
shown the following figure), and one with a single hinge. All three cable covers are
shown in
FIGURE: Second-Generation CMA Components on page 53 .
FIGURE:
Removing the CMA Flat Cable Covers