Sun Microsystems Server X4-2, Руководство по установке

Страница: 170 / 208

156 Sun Server X4-2 Installation Guide • February 2014
When prompted, type
y
to confirm:
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears.
Note –
By default, the system displays the output to the serial port. If you do not
select an option on the GRUB menu, after five seconds, the GRUB menu is no longer
available, and the system continues with the output directed to the serial port.
4. From the GRUB menu, use the up and down arrow keys to select the display
option, then press Enter. Options include:
You can choose whether you want to continue to direct the display to the serial
output or direct the display to a device connected to the video port.
■
For the serial port:
Oracle Solaris 11.1 - Serial Port ttya
■
For the video port:
Oracle Solaris 11.1 - Graphics Adapter
Note –
If you choose to display output to the video port, you must connect a device
to the VGA connector on the server and an input device (USB keyboard or mouse)
and then complete the configuration from that device. See
“Cabling the Server” on
page 75 for information about attaching devices to the server. You can also use the
Oracle ILOM Remote Console feature, which acts as a remote KVM.
5. When the Oracle Solaris 11 installer begins, follow the on-screen prompts to
configure the software using the information you collected earlier about your
organization and network environment.
The screens that are displayed will vary, depending on the method that you chose
for assigning network information to the server (DHCP or static IP address).
6. When installation is complete, end your console sessions using one of the
following methods:
■
From the Oracle ILOM web interface, close the Remote Console window, and
then log out of Oracle ILOM.
GNU GRUB Version 1.99 ,5.11.0.175.1.0.0.24.2
Oracle Solaris 11.1 - Serial Port ttya
Oracle Solaris 11.1 - Graphics Adapter