Sun Microsystems Server X4-2, Руководство по установке

Страница: 182 / 208

168 Sun Server X4-2 Installation Guide • February 2014
1. If you are not already logged in to Oracle ILOM, log in locally from a serial
connection or remotely using an Ethernet connection.
See “Connecting to Oracle ILOM” on page 81 .
2. Power on or restart the server, as follows:
■
To power on the server, use one of the following methods:
■
From the Oracle ILOM web interface System Information page, click Host
Management > Power Control, and in the Select Action list box, click Power
On.
■
From the Oracle ILOM CLI , type:
-> start /System
When prompted, enter
y
to confirm:
Are you sure you want to start /System (y/n)? y
Starting /System
■
To restart the server, use one of the following methods:
■
From the Oracle ILOM web interface, click Host Management > Power
Control, and in the Select Action list box, click Reset.
■
From the Oracle ILOM CLI , type:
-> reset /System
When prompted, enter
y
to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
The server begins the boot process.
3. Start the host console using one of the following methods.
■
From the Oracle ILOM web interface, click Remote Control > Launch Remote
Console.
■
From the Oracle ILOM CLI, type:
-> start /HOST/console
When prompted, type
y
to confirm:
Are you sure you want to start /HOST/console (y/n)? y
Serial console started.
After the server boots, the GRUB menu appears.