Sun Microsystems Server X4-2, Руководство по установке

Страница: 111 / 208

Connecting to Oracle ILOM 97
■
Remote CD/DVD Image – Select CD-ROM Image to redirect the server to the
ISO image file located on the remote system.
Note –
Using either of the CD/DVD options to install software on your server might
significantly increase the time necessary to perform the installation because the
content is accessed over the network. The installation duration depends on the
network connectivity and traffic.
▼
Access Serial Host Console Using the Oracle
ILOM CLI
1. Log in to the server Oracle ILOM using an account with Administrator
privileges.
Use one of the following methods:
■
Use the serial management port as described in “Log In to Oracle ILOM Using
a Local Serial Connection” on page 84 .
■
Use a client system to establish an SSH session over the network as described in
“Log In to Oracle ILOM Remotely Using the CLI” on page 87 .
2. To access the host serial console, type the command:
->
start /HOST/console
The serial console output appears on the screen.
Note –
If the serial console is in use, stop and restart it using the
stop
/HOST/console
command followed by the
start /HOST/console
command.
3. To return to the Oracle ILOM console, press Esc followed by the “(“ character
(Shift-9).
Troubleshooting the Service Processor
Connection
This section addresses two issues that might occur regarding the Oracle ILOM
service processor (SP):
■
The Oracle ILOM SP is hung and needs to be reset.