Sun Microsystems Server X4-2, Руководство по установке

Страница: 80 / 208

66 Sun Server X4-2 Installation Guide • February 2014
FIGURE:
Disconnecting Connector D
b. Use your right hand to support the CMA and use your left thumb to push in
(toward the left) on the connector D latching bracket release tab labeled
PUSH (callout 2), and pull the latching bracket out of the left slide-rail and
put it aside [frames 3 and 4].
5. To disconnect connector C:
a. Place your left arm under the CMA to support it.
b. Use your right thumb to push in (toward the right) on the connector C release
tab labeled PUSH (callout 1), and pull connector C out of the right slide-rail
[frame 1 and 2].
Figure Legend
1 Connector D release tab (green)
2 Slide-rail latching bracket release tab (labeled PUSH)