Sun Microsystems Server X4-2, Руководство по установке

Страница: 57 / 208

Installing the Server Into a Rack 43
FIGURE:
Tool-less Rackmount Kit Contents
Related Information
■
“Rack Requirements” on page 40
▼
Stabilize the Rack for Installation
Caution –
To reduce the risk of personal injury, stabilize the rack cabinet, and
extend all anti-tilt devices before installing the server.
Refer to your rack documentation for detailed instructions for the following steps.
1. Open and remove the front and rear doors from the rack cabinet.
Note – The front and rear doors need to be removed only if they impinge on the
mounting bay.
Figure Legend
1 Slide-rails
2 Mounting brackets
3 Four M4 x 5 fine-pitch mounting bracket securing screws (optional)
4 Installation card