Sun Microsystems Server X4-2, Руководство по установке

Страница: 116 / 208

102 Sun Server X4-2 Installation Guide • February 2014
■
Oracle X4 Series Servers Administration Guide at:
http://www.oracle.com/goto/x86AdminDiag/docs
Accessing Oracle System Assistant
Use one of the following methods to access Oracle System Assistant:
■
“Launch Oracle System Assistant Locally” on page 102
■
“Launch Oracle System Assistant Using the Oracle ILOM Web Interface” on
page 104
Related Information
■
“Set Up Software and Firmware Using Oracle System Assistant” on page 105
■
“Setting Up an Operating System and Drivers” on page 106
▼
Launch Oracle System Assistant Locally
To launch Oracle System Assistant locally you must be present at the server and have
access to the following:
■
VGA monitor
■
USB keyboard
■
USB mouse
1. Ensure that the server is in standby power mode.
When the server is in standby power mode, the Power/OK LED on the front panel
blinks slowly.
2. Connect locally to the server.
Follow the cabling instructions in “Cabling the Server” on page 75 .
3. Press the Power button on the front panel of the server to power on the server to
full power.
The server boots, and power-on self-test (POST) and boot messages appear on the
monitor.
Stay with the server. You need to interrupt the boot process.