Sun Microsystems Server X4-2, Руководство по установке

Страница: 106 / 208

92 Sun Server X4-2 Installation Guide • February 2014
Note –
The IPv6 configuration options listed in the above table take effect after they
are set, that is, you do not need to commit these changes under the
/network
target.
Note – You can enable the
stateless
auto-configuration option to run at the same
time the option for
dhcpv6_stateless
is enabled or the option for
dhcpv6_stateful
is enabled. However, the auto-configuration options for
dhcpv6_stateless
and
dhcpv6_stateful
should not be enabled to run at the
same time.
5. To set a static IPv6 address, specify the following property types:
Property Set Property Value Description
state set state=enabled
The IPv6 network state is enabled by
default. To enable an IPv6
auto-configuration option, set this state to
enabled
.
autoconfig set autoconfig=
<value> Specify this command followed by the
autoconfig value you want to set.
Options include:
•
stateless
(default setting)
Automatically assigns IP address learned
from IPv6 network router.
•
dhcpv6_stateless
Automatically assigns DNS information
learned from the DHCPv6 server.
•
dhcpv6_stateful
Automatically assigns the IPv6 address
learned from the DHCPv6 server.
•
disable
d
Disables all auto-configuration property
values and sets the read-only property
value for Link Local address.