Sun Microsystems Server X4-2, Руководство по установке

Страница: 54 / 208

40 Sun Server X4-2 Installation Guide • February 2014
Related Information
■
“About the Installation Procedure” on page 1
■
“Preparing for Server Installation” on page 5
Installation Prerequisites
Ensure that the following tasks are complete before you start the rackmount
procedures:
■
Install all optional components purchased for the server. See “Optional
Component Installation” on page 18 .
■
Ensure that your site meets the required electrical and environmental
requirements. See
“Preparing for Server Installation” on page 5 .
Rack Requirements
The rack into which you install the Sun Server X4-2 must meet the requirements
listed in the following table. Oracle’s Sun Rack II is compatible with the Sun Server
X4-2. For information about Oracle’s Sun Rack II, see
“Preparing for Server
Installation” on page 5 .
TABLE:
Rack Requirements
Item Requirement
Structure Four-post rack (mounting at both front and rear).
Supported rack types: square hole (9.5 mm) and
round hole (M6 or 1/4-20 threaded only.
Two-post racks are not compatible.
Rack horizontal opening and unit
vertical pitch Conforms to ANSI/EIA 310-D-1992 or IEC 60927
standards.
Distance between front and rear
mounting planes Minimum 61 cm and maximum 91.5 cm
(24 inches to 36 inches).
Clearance depth in front of front
mounting plane Distance to front cabinet door is at least 2.54 cm
(1 inch).