SMC Networks IZT43 Series, Руководство по эксплуатации

Страница: 52 / 67

５２
4-6.Replacement of the assembly
·
Be sure to remove power supply and air supply to the controller, high voltage power supply module and nozzle
before cleaning the emitter or replacing the emitter cartridge.
· Never touch the emitter with the power supplied to the controller, high voltage power supply module or nozzle.
Electric shock may cause injury.
·
If the emitter cartridge is removed while air is supplied, the emitter cartridge jumps out by compressed air.
Replace the emitter cartridge after discharging the supply air.
·
If emitter cartridges are not securely mounted to the body, they may eject or release when air is supplied to
the product.
4-6-1. Replacement of the emitter cartridge
· Securely mount or remove the emitter cartridges referencing the instructions shown below.
·
Securely mount or remove the emitter cartridges with hands and do not use tools.
(Tightening torque: 0.1 to 0.2 Nm)
4-6-2. Replacement of the high voltage cable assembly or the body assembly
·
Securely mount or remove the high voltage cable assembly or body assembly referencing the instructions
shown below.
Emitter cartridge
Body assembly
High voltage cable assembly
Cross recessed round head screw
Cable clip
Cross recessed round head screw
(
Tightening torque: 0.11 to 0.15 Nm
)
Cable clip
High voltage cable assembly
(2)Rotate the cartridge in the
counter-clockwise direction.
(3) Pull to remove.
Removal of the emitter cartridge
(1) Slide to unlock
(1) Insert the cartridge.
(2) Rotate the emitter cartridge
for in the clockwise direction.
Mounting of the emitter cartridge
(3) Slide to lock.
(1) Insert the high voltage cable assembly.
Removal
Mounting
(2) Tighten the screw.
(3) Insert the cable clip
(1) Remove the cable clip.
(2) Remove the screw. (3) Pull to remove the high
voltage cable assembly.