SMC Networks IZT43 Series, Руководство по эксплуатации

Страница: 7 / 67

７
10) Be sure to remove power supply and air supply to the controller, high voltage power supply module
and nozzle before starting the product installation.
· If installation or adjustment is performed being supplied with power or air, electric shock, failure or injury can
result.
11) High voltage power supply module uses a fan. 20mm or
more space from the exhaust port is necessary for ventilation.
·
Or install the product in a ventilated location so peripheral
device are not affected.
12) Do not damage the cable or apply a heavy object or pinch
the cable. Avoid repeatedly bending or stretching the cable.
·
It may cause an electric shock, fire, or breaking of wire.
13) Do not carry this product by holding its cables.
·
It may cause an injury or damage to the product.
1) When IZT43 series is installed, keep space below from structures or components.
·
If there are electrically conductive objects such as walls or structures close to the nozzle, generated ions may
not reach the target object effectively or product failure or electric shock can result due to dielectric or short-
circuit.
2) After installation, verify the performance of this product.
·
The performance of the product varies depending on the surrounding installation and operating conditions.
After installation, verify the performance of this product.
3) When installing Ionizers which operate in DC mode (one polarity, positive or negative) with IZT43 close
together, they should be positioned at least two meters away from each other.
When IZT43 which operates in AC close to the Ionizer which operates in DC mode, separate them by at least
two meters. The offset voltage (ion balance) may not be adjusted by the built-in sensor due to the ions
discharged from the Ionizer which operates in DC mode.
4) Use specified bracket.
Caution
IZT43
18.1
Exhaust port
Controller High voltage
power supply
module
50.5
Unit :mm
8
8