SMC Networks IZT43 Series, Руководство по эксплуатации

Страница: 22 / 67

２２
2)Separate connection
· For separate connection, an optional separate cable is required.
·
Mount the spacers (included) to fix the separate cable to the high voltage power supply module.
Fix the spacers (2 pcs.) to the plug (male side) of the D-sub connector on the high voltage power supply
module.
·
Connect the controller and high voltage power supply module after mounting the spacers and fix them
using 2 attached screws (M2.6).
Spacer tightening torque: 0.4 to 0.6 Nm
Separate cable tightening torque: 0.25 to 0.35 Nm
3)Connecting multiple units.
·
Up to 4 controllers and high voltage power supply modules can be connected together.
· Controller IZTC41 can be connected when IZTP43, IZTP41 and IZTP42 are used together, but IZTP40
cannot be connected.
·

When multiple controllers are connected, make sure that the displayed content and the number of
connected controller is consistent after power is supplied.
(Connected CH turns on or flashes)
Direct connection
M2.6
screw
M2.6
screw
IZTC41
Controller
IZT40-CF
□
Separate cable
IZTP43
High voltage power supply module
Spacer
(Included)
D-sub connector
socket
D-sub connector
plug
Separate connection