SMC Networks IZT43 Series, Руководство по эксплуатации

Страница: 43 / 67

４３
4-4-3. Frequency set mode
· Set the ion generation frequency of the nozzle (high voltage power supply module) selected by "Channel
selection mode”.
[Ion generating frequency setting]
·
Select the CH in the selection mode and press the
S button once. The frequency will flash and the
setting of the ion generation frequency of the
selected nozzle becomes possible.
· The Ion generation frequency is set by pressing
the
▼ or ▲ button.
·
The Frequency display is different depending on
the model. Refer to the display of frequency
example below.
[Change to the next mode]
· Press the S button once to change to the next
mode and store the frequency setting.
·
When the power is supplied the saved setting will
be displayed.
·
The selected nozzle (high voltage power supply
module) moves on to the ion generation stop mode
by pressing ▼ and
▲ button simultaneously for 2
s or longer and stops the ion generation. To
release, press the S button once or turn the power
off and on again. Refer to[ 4-4-8. Ion generation
stop mode].
※ Caution
If the mode is changed to ion generation stop mode
during the frequency setting or the ion generation is
stopped by turning off the power supply, the setting
during change is not stored. Change the setting again.
Display of frequency
1Hz 3Hz 5Hz 8Hz 10Hz 15Hz 20Hz 30Hz
DC ＋ DC －
Default frequency setting is “30 Hz“.
Set the optimum frequency depending on the operating environment and installed distance.
Example of frequency setting mode for CH1.
Frequency 30 Hz.
Flash
(green)
Display example of
IZTC41