SMC Networks IZT43 Series Скачать руководство пользователя страница 25

Страница: 25 / 67

２５

c. Install to the DIN rail.

After installing the DIN rail mounting bracket, fix the controller and high voltage power supply module
to the DIN rail using M4 screws.

Tightening Torque: 1.30 to 1.50 Nm

Ⅱ

. When the controller and high voltage power supply module are connected by separate cable

Mount the spacers to the high voltage power supply module connector. Refer to 3-1-4. Connect the
controller and high voltage power supply module.

a. DIN rail mounting bracket

Fix the DIN rail mounting bracket to the controller and high voltage

power supply module using M4 screws.

Tightening Torque: 1.30 to 1.50 Nm

b. Install to the DIN rail.

After installing the DIN rail mounting bracket, fix the controller and

high voltage power supply module to the DIN rail using M4 screws.

Tightening Torque: 1.30 to 1.50 Nm

c. Connection of separate cable

Mount the spacers (included) to fix the separate cable to the high
voltage power supply module.

Fix the spacers (2pcs.) to the plug (male side) of the D-sub
connector with high voltage power supply module.

Connect the controller and high voltage power supply module after
mounting the spacers and fix them using M2.6 screws. Refer to
3-1-4. Connect the controller and high voltage power supply module.

Spacer tightening torque: 0.4 to 0.6 Nm
Separate cable tightening torque:0.25

～

0.35 Nm

Fix with M4 screws

(Include)

Fix with M4

screws

(Included)

IZT40-B1

DIN rail mounting bracket

for controller

Holding screw

D-sub connector

Plug

IZT40-B2

DIN rail mounting bracket

for High voltage power

supply module

Fix with M4

screws

(Included)

IZT40-B2

DIN rail mounting bracket

for High voltage power

supply module

E :

Remove the fixing bracket.

IZT40-B1

DIN rail mounting bracket

for controller

Holding screw

Содержание IZT43 Series




































































Результаты поиска

Содержание IZT43 Series

Отзывы:

Похожие инструкции для IZT43 Series

Бренды по названию

Популярные бренды

SMC Networks IZT43 Series, Руководство по эксплуатации

Результаты поиска

Содержание IZT43 Series

Отзывы:

Похожие инструкции для IZT43 Series

Бренды по названию

Популярные бренды