Siemens TIM 1531 IRC, Руководство по эксплуатации

Страница: 282 / 338

Diagnostics and upkeep
7.1 Diagnostics options
TIM 1531 IRC
282
Operating Instructions, 02/2018, C79000-G8976-C468-02
● Industrial Remote Communication
Here, you obtain WAN-specific information on the TIM module:
–
Partner
Here you will find address and configuration data of the partners, a connection statistic
and further diagnostics information. Click on a subscriber to display further
information.
You will also find information on the partners in the WBM.
– Data point list
Information on the data points such as configuration data, value, connection status
etc.
– Protocol diagnostics
With this function you can enable the logging of ST7 frames of the TIM and evaluate it
using the SINAUT engineering software.
With the function "Enable protocol trace" the frames received and sent by the module
are copied for several seconds.
With the function "Disable protocol trace", the logging is stopped and the data is
written to a logging file.
With the function "Save", you can save the log file on the engineering station.
To evaluate the file you nedd to rename it to the format "*.7dt". You can decode and
analyze the renamed file using the TIM frame monitor of the SINAUT diagnostics tool.
– Device-specific events
Here you will find diagnostics buffer entries of the TIM and an overview of the sent
messages (SMS messages / e-mails).
● Time
Specification of the current time in the module and the time source
Functions
You can run the following functions here:
● Firmware update
For a description, see section Update firmware (Page 284).
● Assign IP address
● Assign PROFINET device name
● Reset to factory settings
For a description, see section Resetting to factory settings (Page 287).
Web server (WBM) of the TIM
From a PC you can use HTTP/HTTPS to access the Web pages (WBM) of the TIM. The
WBM returns a variety of information.
For access to the content, refer to the section The Web server (WBM) (Page 263).