Communications configuring
3-114
System- and communication configuring D7-SYS - SIMADYN D
Edition 12.2003
Rules:
•
The communications reference must correspond with that configured
in the CFC (address stage 1 at the address input).
•
The local LSAP with the entry "remote LSAP" must correspond to the
remote transmitter.
•
Remote addresses can be entered, defined, but then only telegrams
of the appropriately selected transmitter are received (access
protection!); or the value can be set to 255, and then the association is
open for all. Recommendation: A "broadcast receiver" association
should always be defined, as this is the only possibility to provide
access protection for broadcast applications.
•
The remote LSAP can be edited, but is however not evaluated
(corresponds to the value 255).
•
The maximum PDU length should only be changed if the client cannot
handle the specified length.
Features:
•
SIMADYN D is server (transmitter)
•
SIMADYN D initiates data transfer
•
An association must be configured for each object which is to be
transmitted.
•
A connection is not established between the communication partners;
transferred data is not acknowledged
Application:
•
Process data, with SIMADYN D as transmitter.
Communications reference
:
Type: Broadcast
transmitter
Association type
:
BRCT
Local LSAP
:
Remote address
:
127
Remote LSAP
:
Max. PDU length
:
241
Supported utility
:
Information
report
:
.req
Name :
Table 3-52
Mask, "Broadcast transmitter"
Broadcast
transmitter
