3.
Fill in the Repair Form including the Non-Risk Declaration and send it in advance
to the SICK representative by e-mail.
4.
Pack the unit carefully and shockproof in the original packaging for transport.
5.
Enclose the Repair Form and attach it to the outside of the packaging.
12.3.2
Cleaning the device before returning
Important information
NOTICE
Device damage through incorrect cleaning.
•
Close the housing before cleaning so that no fluid can penetrate.
•
Do not use a high-pressure cleaner, aggressive mechanical or chemical cleaning
agents.
Prerequisites
•
Device is voltage-free.
Procedure
Clean surfaces and parts with media contact
1.
Remove loose contamination with compressed air.
2.
Remove adhering contamination with a mild soap solution and a soft cloth.
3.
Do
not
clean optical surfaces.
12.4
Disposal
Important information
NOTE
The following subassemblies contain substances that may have to be disposed of
separately:
•
Electronics: Capacitors, rechargeable batteries, batteries.
•
Display: Liquid of LC display.
•
Sample gas filter: Could be be contaminated with pollutants.
•
All lines with sample gas contact could be contaminated with pollutants.
Disposal of the device
The device can easily be disassembled into its components which can then be sent to
the respective raw material recycling facilities.
12
DECOMMISSIONING
112
O P E R A T I N G I N S T R U C T I O N S | MARSIC280
8021339/1CHC/V1-1/2021-07 | SICK
Subject to change without notice
