5.5.11
Connecting the discharge hose to the condensate pump
Important information
NOTICE
Condensate formation can lead to corrosion in the housing.
b
Drain the condensate outlet of the cooler to the outside.
Procedure
1.
Guide the condensate outlet out of the housing through the duct provided.
5.5.12
Connecting the condensate container (option)
Overview
The purpose of the condensate container is to collect condensate within the sample
gas outlet in order to prevent condensate formation in the direct environment of the
measuring device.
Figure 12: Condensate container
1
Condensate container
2
Metal stand
Important information
NOTE
To avoid condensate formation in the discharge hose, the discharge hose must be
installed in a downward direction.
Prerequisites
•
Discharge hose connected to condensate pump.
Procedure
1.
Place the metal stand for the condensate container on the floor next to the
measuring device and fasten it securely.
2.
Place the condensate container in the metal stand.
3.
Connect the reducer from 6 mm to 10 mm to the discharge hose of the conden‐
sate pump.
5
MOUNTING
38
O P E R A T I N G I N S T R U C T I O N S | MARSIC280
8021339/1CHC/V1-1/2021-07 | SICK
Subject to change without notice
