SICK MARSIC280, Руководство по эксплуатации

Страница: 99 / 120

Logbook
text (Dis‐
play) Logbook
text (SOPAS
ET) Description Interpretation and possibly
correction
X X U pressure
value absent
U pressure
value absent InProcessValue pressure
not received Gas module available? Pres‐
sure component available
on gas module? Pressure
in Auxiliary value Table of
BCU?
X X M pressure
value absent
M pressure
value absent InProcessValue pressure
not received Gas module available? Pres‐
sure component available
on gas module? Pressure
in Auxiliary value Table of
BCU?
X
* X X M Zero drift M Zero drift Zero drift limit value
exceeded Check test gas, check set‐
point value; check measur‐
ing system
X
* X X M Span drift M Span drift Span drift limit value
exceeded
Check test gas, check set‐
point value; check measur‐
ing system
X
* X X M zero gas
error
M Zero gas Zero point adjustment not
saved; drift limit value
exceeded by > 50% Check test gas, check set‐
point value; check measur‐
ing system
X
* X X M Span gas
error
M Span gas Span point adjustment not
saved; drift limit value
exceeded by > 50% Check test gas, check set‐
point value; check measur‐
ing system
X
* X X C Test gas
active
C Test gas
active Test gas is in system At least one component
in the system is being
adjusted/validated
X
* X X C Adj/val C Adj/val Validation or adjustment
activated, sensor or system
is checked Status message, wait until
procedure has completed
X X E No A/D
reference
E no A/D ref‐
erence / E
No IR refer‐
ence No zero gas AD reference
values Replace complete analyzer
module
X X U Pressure
value FCU
U Pressure
value FCU InProcessValue pressure
has F, C and/or U flag Check pressure component
of gas module, observe fur‐
ther gas module messages
X F Motor 1 F Motor 1 DEFOR: Initialization of
motor 1 incorrect Restart device. If error is
repeated, replace complete
analyzer module
X F Motor 2 F Motor 2 DEFOR: Initialization of
motor 2 incorrect Restart device. If error is
repeated, replace complete
analyzer module
X F Motor 3 F Motor 3 DEFOR: Initialization of
motor 3 incorrect Restart device. If error is
repeated, replace complete
analyzer module
X X F Measuring
detector F Measuring
detector DEFOR: Error message
from measured value
detector Restart device. If error is
repeated, replace complete
analyzer module
X F Ref.-detec‐
tor F Ref.-detec‐
tor DEFOR: Error message
from reference value detec‐
tor Restart device. If error is
repeated, replace complete
analyzer module
X F Motor 1
position F Motor 1
position Motor 1 position error Restart device. If error is
repeated, replace complete
analyzer module
TROUBLESHOOTING
11
8021339/1CHC/V1-1/2021-07 | SICK O P E R A T I N G I N S T R U C T I O N S | MARSIC280 99
Subject to change without notice