Santerno Sinus M, Руководство пользователя, Страница: 87 / 219

9-9

Operating command via FX, RX terminal (Modality 2)
Group Code Parameter Name Setting Range Initial Unit
Drive group
drv [Drive mode] 2 0 ~ 3 1
I/O group I17
[Multi-function input
terminal P1 define]
0 0 ~ 29 0
I18
[Multi-function input
terminal P2 define]
1 0 ~ 29 1

Set the drv to 2.

Set I17 and I18 to 0 and 1 to use P1 and P2 as FX and RX terminals.

FX: Operating command setting. Motor runs in forward direction when RX terminal (P2) is
OFF.

RX: Direction of motor rotation select. Motor runs in reverse direction when RX terminal
(P2) is ON.

Operating command via RS485 communication (Modality 3)
Group Code Parameter Name Setting Range Initial Unit
Drive group drv [Drive mode] 3 0 ~ 3 1
I/O group I59
[Communication protocol
select]
- 0 ~ 1 0
I60 [Inverter number] - 1 ~ 250 1
I61 [Baud rate] - 0 ~ 4 3

Set the
drv
to 3.

Set I59, I60 and I61correctly.

Inverter operation is performed via RS485 communication.

Refer to Chapter. 13, RS485 communication.
FX
RX
Freq.