Santerno Sinus M, Руководство пользователя

Страница: 79 / 219

9-1
CHAPTER 9 - BASIC FUNCTIONS
9.1 Frequency mode

Keypad Frequency setting 1
Group Code Parameter Name Setting Range Initial Unit
Drive group 0.00 [Frequency Command] - 0 ~ 400 0.00 Hz
Frq [Frequency mode] 0
0 ~ 7 0

Set Frq – [Frequency mode] to 0 {Frequency setting via Keypad 1}.

Set the desired frequency in
0.00
and press the Prog/Ent (

) key to enter the value into
memory.

The value is settable less than F21 – [Max frequency].

When remote keypad is connected, keypad keys on the body are deactivated.

Keypad Frequency setting 2
Group Code Parameter Name Setting Range Initial Unit
Drive group 0.00 [Frequency Command] - 0 ~ 400 0.00 Hz
Frq [Frequency mode] 1
0 ~ 7 0

Set Frq – [Frequency mode] to 1{Frequency setting via Keypad 2}.

In 0.00 , frequency is changed upon pressing the Up (

)/Down (

) key. In this case,
UP/Down keys serve as a potentiometer.

The value is settable less than F21 – [Max frequency].

When remote keypad is connected, keypad keys on the body are deactivated.