Santerno Sinus M, Руководство пользователя, Страница: 3 / 219

3

Wiring and periodic inspections should be performed at least 10 minutes after
disconnecting the input power and after checking the DC link voltage is discharged with
a meter (below DC 30V).
Otherwise, you may get an electric shock.

Operate the switches with dry hands.
Otherwise, you may get an electric shock.

Do not use the cable when its insulating tube is damaged.
Otherwise, you may get an electric shock.

Do not subject the cables to scratches, excessive stress, heavy loads or pinching.
Otherwise, you may get an electric shock.
CAUTION

Install the inverter on a non-flammable surface. Do not place flammable material nearby.
Otherwise, fire could occur.

Disconnect the input power if the inverter gets damaged.
Otherwise, it could result in a secondary accident and fire.

After the input power is applied or removed, the inverter will remain hot for a couple of
minutes.
Otherwise, you may get bodily injuries such as skin-burn or damage.

Do not apply power to a damaged inverter or to an inverter with parts missing even if the
installation is complete.
Otherwise, electric shock could occur.

Do not allow lint, paper, wood chips, dust, metallic chips or other foreign matter to enter
the drive.
Otherwise, fire or accident could occur.