Santana PS-10, Руководство по обслуживанию

Страница: 264 / 627

ENGINE REPAIR 6A-53
CYLINDERHEAD COVER GASKET
Removal
1) Disconnect negative cable at battery.
2) Remove timing belt (see 6A-28).
3) Remove fuel injectors (1) (see 6A-32,
mechanical mechanical mechanical mechanical mechanical
injection engine injection engine injection engine injection engine injection engine
)
4) Remove fuel injectors (2) and rail (3) (see 6A-36,
common common common common common
rail engine rail engine rail engine rail engine rail engine
)
17
14
15
16
5) Disconnect or remove
(mechanical injection (mechanical injection (mechanical injection (mechanical injection (mechanical injection
engine) engine) engine) engine) engine)
:
• Thermometric switch K.S.B. power supply (11).
• Union nut and pressure pipe (6) of L.D.A. device.
• Clamp and fuel return hose (7).
6) Disconnect or remove
(all engines) (all engines)
(all engines) (all engines)
(all engines)
:
• Oil filler bracket nut (4).
• Heat exchanger water return hose (9) and pipe bolt (5).
• Oil condenser bolt (10) and oil condenser (12).
• Oil steam recirculation hose bracket (5)
• Couplers of water temperatures sensor (14) and (16).
• Coupler of oil pressure switch (17).
• Degasifying tube and outlet hose for water from the
thermostat (15).
• Support for degasifier hoses fixed to the inlet box of the
intake manifold. Disconnect expansion vase of the water
radiator and take it away.
1
MECHANICAL INJECTION ENGINE
COMMON RAIL ENGINE
6
7
8
9
10
11
12
13
4
5
2
3