Ross LDP-8242 Скачать руководство пользователя страница 87

Страница: 87 / 100

LDP-8242 User Manual (Iss. 03)

Operating Instructions • 3–53

DashBoard™ Status/Error Indicators and Displays

Table 3.4

shows and describes the DashBoard™ status indicators and displays. These indicator

icons and displays show status and error conditions relating to the LDP-8242 card itself and
remote (network) communications.

Table 3.4 DashBoard™ Status Indicators Icons and Displays

Indicator Icon or Display

Error Description

Red indicator icon in Card Access/Navigation Tree pane shows card with Error

condition (in this example, the Card Access/Navigation Tree pane shows a general

error issued by the LDP-8242 card in slot 7).

Specific errors are displayed in the Card Info pane (in this example “No connection to

device” indicating LDP-8242 card is not connecting to frame/LAN).

If the LDP-8242 card is not connecting to the frame or LAN, all controls are grayed-out

(as shown in the example here).

Gray indicator icon in Card Access/Navigation Tree pane shows card(s) are not being

seen by DashBoard™ due to lack of connection to frame LAN (in this example, both a

LDP-8242 card in slot 7 and the MFC-8320-N Network Controller Card for its frame in

slot 0 are not being seen).

Yellow indicator icon in Card Access/Navigation Tree pane shows card with Alert

condition (in this example, the Card Access/Navigation Tree pane shows a general

alert issued by the MFC-8320-N Network Controller Card).

Clicking the card slot position in the Card Access/Navigation Tree (in this example

Network Controller Card “Slot 0: MFC-8320-N”) opens the Card Info pane for the

selected card. In this example, a “Fan Door Open” specific error is displayed.

Yellow indicator icon in LDP-8242 Card Info pane shows error alert, along with cause

for alert (in this example, the LDP-8242 is receiving no video input, or a video input that

is invalid for the card and/or its current settings).

Содержание LDP-8242





































































































Результаты поиска

Содержание LDP-8242

Отзывы:

Ross LDP-8242, Руководство пользователя, Страница: 87 / 100

Результаты поиска

Содержание LDP-8242

Отзывы: