Ross LDP-8242 Скачать руководство пользователя страница 51

Страница: 51 / 100

LDP-8242 User Manual (Iss. 03)

Operating Instructions • 3–17

Framesync

Provides video frame sync/delay control and output control/loss of

program video failover selection controls.

Framesync Enable

Selects Frame Sync functions from the choices shown to the left and

described below.

•

Free Run

: Output video is locked to the card’s internal clock.

Output video is not locked to external reference.

•

Lock to Reference

: Output video is locked to external reference

received on the frame reference bus. Default uses Ext Ref 1 frame

bus, with failover to Ext Ref 2 in the event valid reference signal is

not present on Ext Ref 1. (External reference signals Reference 1

and Reference 2 are distributed to the card and other cards via an

8320 frame bus.)

Note

: If valid reference is not received, the

indication appears in the Card Info status

portion of DashBoard™, indicating invalid frame sync reference

error.

•

Lock to Input

: Uses the program video input video signal as the

reference standard.

Note

: If Lock to Input is used for framesync, any timing instability on

the input video will result in corresponding instability on the output

video.

Initial Startup Format Select

Selects a synthesized frame sync format/rate to be invoked (from the

choices shown to the left) in the time preceding stable lock to external

reference.
Set this control to that of the intended external reference to help ensure

smoother frame sync locking.

Program Video Output Mode Select

Provides a convenient location to select between card program video

output and other technical outputs from the choices shown to the left and

described below.

•

Input Video

– card outputs input program video (or loss of signal

choices described below).

•

Flat Field (Black)

– card outputs black flat field.

•

Freeze

– card outputs last frame having valid SAV and EAV codes.

•

Test

Pattern

– card outputs standard technical test pattern (pattern

is selected using the Pattern drop-down described below).

Loss of Input Signal Selection

In the event of program input video Loss of Signal (LOS), determines

action to be taken as follows:

•

Disable Outputs

: Disable program video SDI outputs.

•

Flat Field (Black)

– go to black flat field on program video output.

•

Freeze

– go to last frame having valid SAV and EAV codes on

program video output.

•

Test Pattern

– go to standard technical test pattern on program

video output (pattern is selected using the Pattern drop-down

described below).

Содержание LDP-8242





































































































Результаты поиска

Содержание LDP-8242

Отзывы:

Ross LDP-8242, Руководство пользователя, Страница: 51 / 100

Результаты поиска

Содержание LDP-8242

Отзывы: