Ross LDP-8242 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 100

Ross LDP-8242 Скачать руководство пользователя страница 10

1–2 • Introduction

LDP-8242 User Manual (Iss. 03)

Overview

The LDP-8242 is ideal for correcting irritating loudness differences between programs and
commercials. Featuring 24-bit audio processing that supports 16 channels of embedded audio
from an HD/SD-SDI signal.

With Linear Acoustic AEROMAX™ technology, the card applies loudness control on up to six
channels of audio from any of the 16 channels of embedded audio. Linear Acoustic
AEROMAX™ algorithms use a sophisticated multi-band approach to loudness processing. These
algorithms can apply multifaceted loudness correction specifically targeted to various frequency
ranges and other characteristics within the program material, resulting in audio free from abrupt
loudness or image shifts while preserving more of the original content than previously possible.
Because the card processes audio loudness locally and in sync with the video, loudness is
processed without the accumulated latency delay found in other loudness processors.

An optional discrete AES option provides 16 channels of discrete audio support, with 8 AES pair
BNCs, which can be configured as inputs or outputs. The AES-8242 option provides discrete
audio loudness processing as well as 16 channel embedding / de-embedding.

Optional Linear Acoustic UPMAX upmixing technology allows legacy stereo program audio to
be converted to 5.1 channel audio, with the UMA-8242 option.

Features

The LDP-8242 includes the following features:

• Loudness Processing with Linear Acoustic AEROMAX™ algorithm
• Actively and automatically corrects irritating loudness level changes
• Automatic video delay to match audio processing delay
• Loudness control for stereo or 5.1 audio
• Sophisticated multi-band processing
• Audio channel mapping, phase inversion and level control
• 16 channels of sample rate conversion
• Passes all audio channels
• 16 channel embedding and de-embedding
• Handles all popular formats of SD (270Mbps) and HD (1.485Gbps) signals
• Reports status and configuration remotely via the DashBoard Control System™
• 5-year transferable warranty

«
...
8
9
10
11
12
...
»

Содержание LDP-8242





































































































Отзывы:

Нет отзывов