Ross LDP-8242 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 100

Ross LDP-8242 Скачать руководство пользователя страница 2

LDP-8242 User Manual

• Ross Part Number: 8242DR-004-03
• Release Date: June 25, 2012.

The information in this manual is subject to change without notice or obligation.

Copyright

© 2012 Ross Video Limited

. All rights reserved.

Contents of this publication may not be reproduced in any form without the written permission of
Ross Video Limited. Reproduction or reverse engineering of copyrighted software is prohibited.

Patents

This product is protected by the following US Patents: 4,205,346; 5,115,314; 5,280,346;
5,561,404; 7,304,886; 7,508,455; 7,602,446; 7,834,886; 7,914,332. This product is protected by
the following Canadian Patents: 2039277; 1237518; 1127289. Other patents pending.

Notice

The material in this manual is furnished for informational use only. It is subject to change without
notice and should not be construed as commitment by Ross Video Limited. Ross Video Limited
assumes no responsibility or liability for errors or inaccuracies that may appear in this manual.

Trademarks

•

is a registered trademark of Ross Video Limited.

• Ross, ROSS, ROSS®, and MLE are registered trademarks of Ross Video Limited.
• openGear® is a registered trademark of Ross Video Limited.
• DashBoard Control System™ is a trademark of Ross Video Limited.
•

Linear Acoustic®

is a registered trademark of Linear Acoustic, Inc. 2.0-to-5.1 audio

upmixer licensed feature uses the

AutoMAX-II™

upmix algorithm provided under

license from

Linear Acoustic Inc

. Loudness processor licensed feature uses

AEROMAX™

algorithms provided under license from

Linear Acoustic Inc

.

Linear

Acoustic

, the “

LA

” symbol,

UPMAX

,

AutoMAX

,

AutoMAX-II

, and

AEROMAX

are

trademarks of Linear Acoustic Inc. All rights reserved.

• All other product names and any registered and unregistered trademarks mentioned in

this manual are used for identification purposes only and remain the exclusive property of
their respective owners.

«
1
2
3
4
...
»

Содержание LDP-8242





































































































Отзывы:

Нет отзывов