Ross LDP-8242, Руководство пользователя, Страница: 63 / 100

LDP-8242 User Manual (Iss. 03) Operating Instructions • 3–29
(continued)
Note : Default factory preset routing routes embedded Ch 1 thru Ch 16 to bus channels Bus Ch 1 thru Bus Ch 16.
Bus Ch 2 thru Bus Ch 16 have controls identical to the controls described here for Bus Ch 1 . Therefore, only the Bus Ch 1
controls are shown here.
For each bus channel, its source should be considered and appropriately set. Unused bus channels should be set to the
Silence
selection.
Bus Channel Source Using the Source drop-down list, selects the audio input source to be
directed to the corresponding bus channel from the choices described
below.
Embedded Ch 1 thru Ch 16 as Source Embed Ch 1 thru Embed Ch 16 range in Source drop-down list routes an
embedded channel (Ch 1 thru Ch 16) to be the source for the selected
destination bus channel.
(In this example, Embed Ch 1 (embedded Ch 1) is the source for
destination Bus Ch 1)
AES Ch 1 thru AES Ch 16 as Source AES Ch 1 thru AES Ch 16 range in Source drop-down list routes an AES
channel (Ch 1 thru Ch 16) to be the source for the selected destination
bus channel.
(In this example, AES Ch 1 is the source for destination Bus Ch 1)
Note : AES inputs are only available on card equipped with the AES-8242
licensed option (AES audio I/O).
AES port connectors (channel pairs) on the card rear module are set as
either Input or Output using the AES Port Direction control on the Output
Audio Routing/Controls DashBoard tab. Make certain an AES channel
pair is not being used an output before assigning it as a source here.
(Refer to Output Audio Routing/Controls (p. 3-35) for more information.)
Downmix A (L/R) thru Downmix D (L/R) as
Source
Downmix A L thru Downmix D R range in Source drop-down list routes a
downmixer output channel to be the source for the selected destination
bus channel.
(In this example, Downmix A L (L output channel of downmixer A) is the
source for destination Bus Ch 1)
Note : See Input Downmixers sub-tab description in this section for more
information.
Flex Mix Sum Node A thru P as Source Flex Mix A thru Flex Mix P range in Source drop-down list routes 1 of 16
flex mix summing nodes (Flex Mix A thru Flex Mix P) to be the source for
the selected destination bus channel.
(In this example, Flex Mix A (sum node of flex mixer A) is the source for
destination Bus Ch 1)
Note : See Input Flex Mix sub-tab description in this section for more
information.
•
•
•
•